MIL-STD-1227B
- Belts, v: Engine Accessory Drive
MS51070
(1 Inch Nominal Width).
- Filter, Fluid, Pressure-Automotive
MS51086
Fuel (10 GPH, Coarse Filtration).
(Copies of specification and standards required by suppliers in con-
nection with specific procurement functions should be obtained from the
procuring activity or as directed by the contracting officer.)
3. DEFINITIONS
For the purpose of this standard, the following defini-
3.1 Definition.
tion shall apply.
3.1.1 The military design engine model 2A016. A 2-cylinder air-cooled,
overhead-valve, 16-cubic-inch-displacement engine having a rating of 3 net
continuous horsepower at 3,600 rpm.
3.1.2 Maximum net corrected brake horsepower. The maximum net corrected
brake horsepower rating with all accessories (including fan, muffler, and
air cleaner) at any engine speed within the operating range is the maximum
observed horsepower available from the engine at wide-open throttle corrected
to standard atmospheric condition.
3.1.3 Intermittent net brake horsepower. The intermittent net brake
horsepower rating is 90 percent of the maximum net corrected brake horsepower.
3.1.4 Continuous net brake horsepower. The continuous net brake horse-
power rating is 3.0 horsepower at 3,600 rpm.
4. GENERAL REQUIREMENTS
When installed in the end item, rotating or reciprocating
4.1 Safety.
subject to high temperatures that are so located as to
parts and parts
to operating personnel and equipment shall be insulated,
become a hazard
or guarded. Exhaust mufflers and piping shall be located to
fully enclosed,
to operating personnel.
minimize hazard
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business